164.5 X 2 V70 BLACK

Fluorocarbon Oring

FKM, Viton®, V

Shore A Description:

The hardness of rubber compounds is measured by the Shore A durometer; the higher the durometer, the harder the compound. Softer compounds stretch easier and seal better on rough surfaces. Harder compounds offer greater abrasion resistance and resistance to extrusion.

60 Shore A is softer than 70

70 Shore A is the standard

90 Short A is very stiff

Specs:

Color Compounds: Green, Brown, Black

Excellent resistance to petroleum products, low compression set and high temperature resistance. The low temperature capability is somewhat restricted, however, in some cases the low temperature sealing capability may be increased by specific design parameters.

Material:

FKM (Fluorocarbon)

Standard Service Temperature: -20°F - +400°F

Application:

Petroleum Fluids, Diester Lubricants, Silicone Fluids, Halogenated Hydrocarbons (Above 212°F), Some Acids, Selected Fluids.

Not Compatible With: Skydrol, Amines, Ketones, Hot Water, Steam, Brake Fluids