We will be closed November 28th and 29th, 2024 for Thanksgiving. We will reopen December 2nd, 2024 at normal time. Have a safe and happy holiday!
ATTN: CANADA CUSTOMERS: If you need to buy seals from us, please call us instead of ordering online to arrange for shipping. As we can not use USPS to ship your package until the strike ends. Thank you!
0155-093.052 (S25-36)
UPC: 33911036
S25 U-Cup
S25 (Rod Seal)
Compact rod seal 0155 (S25) is used for sealing piston rods and plungers. It consists of a synthetic rubber portion (NBR) with proofed fabric either on the dynamic sealing face or the base of the seal.
Compact seals operate even under high pressures because of the good sliding characteristics provided by lubricant retention in the surface texture. This ensures that during operating the seal will not run dry as this is the case with all rubber seals. When normal tolerances are used an additional feature of the fabric or the backup ring is that it prevents extrusion into the clearance gap, and therefore reduces wear of the seal.
Compact rod seal 0155 (S25) has a greather contact sealing surface than those of 1541 (S8) and 1545 (S24). To provide initial sealing under low pressure the inner surface has one or two sealing edges. Even with a worn piston rod the greater sealing surface continues to give good sealing. The plastic backup ring bridges even relatively large clearance gaps.
Compact seal 0155 is used as a piston rod seal in heavy duty hydraulic cylinders. Under arduous conditions, such as misaligned piston rods, shock loading, etc. This seal is bettered by multi-lip seals.
Operating Conditions:
Maximum Speed: 0.5 m/s
Temperature: -30°C to 100°C (-22°F to 212°F)
Maximum Pressure: 250 bar
